Air Drills
  • ML Series Air Drill
  • DH Series Air Drill
  • Air Carts
  • AC Series Air Cart
  • locator

    Features


      Air System

      Simple, accurate seeding results start with an air delivery system designed for dependable, consistent results.

      Distribution System - Versatile offers single and double shoot capability as standard equipment. Simply moving two levers per primary run changes the air cart from single to double shoot. Adjusting the air plenum in front of the fan completes the process.

      Single / Double Shoot - While double shooting, product from the rear tank travels through the bottom set of hoses and product from the front tank(s) travels through the top set of hoses. To single shoot, simply flip two levers per primary run and product from the rear tank is directed to the top set of hoses and mixes with product from the front tank(s).

      Pressurized Lid Seal - Accurate product application is dependant on maintaining constant pressurization within the tank. This unique seal uses air pressure from inside the tank to provide a consistent seal against the lid.

      Fan - A 13" (330 mm) Crary fan is dynamically balanced and highly efficient. This fan develops sufficient air volume to allow for double shooting large application rates.

      A 17" (432 mm) fan delivers large volumes of air at slower speeds, minimizing seed damage. The efficient use of air flow allows the operator to single or double shoot sizeable application rates with a single fan.

      Distribution System
      Single/Double Shoot
      Pressurized Lid Seal
      Fan
      Metering System

      An easy to use mechanical metering system allows for consistent accurate metering of all seed types.

      Metering Roller - (Limited Lifetime Warranty) Versatile Air Carts feature polyurethane, fluted metering rollers. Not only is changing rollers unnecessary when switching from one product to another, but this design also ensures a constant flow of product.

      Range Sprockets - Each metering roller is equipped with a range sprocket cluster that eliminates the need to change metering rollers when switching from one product to another. This adjustment is completed in a few seconds and no tools are required. The metering drive is shear bolt protected.

      Main Drive Transmission - Metering transmissions are powered off the left rear wheel, therefore application rates remain constant even when increasing or decreasing ground speed. The air cart’s implement width can be set by installing two applicable sprockets on this transmission.

      3-Step Rate Test - Rate tests can be time consuming, but not with Versatile Air Carts. The air cart monitor calculates and displays each application rate setting: therefore no charts, decals or calculators are required.
      Step 1: Input desired application rate into monitor.
      Step 2: Crank out product sample into rate pan, weigh product and input weight into monitor.
      Step 3: Install displayed Quick-Change sprocket combination (Mechanical Systems). Zero-Max transmission (Variable Rate Systems) will position itself.

      Metering Housing - Each metering housing has a built-in stone trap to collect foreign material such as small pebbles and fertilizer lumps etc. that have passed through the tank screen. This feature eliminates possible jamming of the metering system or premature roller wear.

      Metering Roller
      Range Sprockets
      Main Drive Transmission
      Metering Housing
      Monitoring System

      Versatile Air Carts are available with either mechanical or variable rate set-ups.

      Flash Monitor - Viewing all air cart functions from in the cab is critical to ensure trouble free seeding. Digital application rates, fan rpm, area per hr/field/season and ground speed can all be viewed by the operator while seeding. Bar graphs for each bin level are controlled by 4 bin level sensors to allow operators the ability to plan ahead for fills.

      In-Cab Rate Control Monitor - An In-Cab Rate Control Monitor allows the operator to adjust the metering rates on-the-go from the tractor cab. An Electric Actuator located on each variable speed transmission increases or decreases application rate.

      Clutch Control - All models feature heavy-duty Warner 12 volt electromagnetic clutches as standard equipment on both the main drive and each individual tank. The main drive clutch can be either manually controlled by the operator, or in placed Auto mode.

      Blockage Monitoring - This option provides an operator with the ability to monitor the flow of product from the cab and will create an alarm if a hose should become plugged. The Optical Blockage Sensors do not rely on contact as competitive pinstyle sensors do, which can result in plugging.

      Unique “Monitor Down” feature - All models feature a fully mechanical metering drive system that allows the operator to continue seeding even if a complete monitor system failure has occurred. Versatile does not recommend operating without a monitoring system, however instances can arise when this emergency mode is necessary. This important feature can prevent costly down time.

      Flash Monitor
      In-Cab Rate Control Monitor
      Blockage Monitoring
      Convenience

      The simple design of Versatile Air Carts allows you to spend less time in the yard and more time in the field. Easy to fill, easy to adjust and easy to clean out the air carts maintain the simplicity you expect from Versatile.

      Tank Openings - Large 22" x 26" (559 x 600 mm) tank openings provide operators with faster filling times. The adjustable over-center lid locks maintain positive air pressure within each compartment. Tank screens are standard to keep out unwanted debris.

      Automatic Work Switch - Included as standard equipment, this industrial switch will engage and disengage the main drive clutch automatically when lowering or raising the seeding implement. A manual position is also provided to give clutch control to the operator.

      Total Tank Cleanout - Removing product from any tank compartment is as simple as positioning the auger under the tank and then opening the total tank cleanout door.

      Versatile has designed the metering roller system so operators can conveniently inspect the roller when tanks are either empty or full.

      Fold down railings and a low tank height allow for off-season storage in sheds with less clearance.

      A large platform with a ladder on each side, provides convenient access to the top of the tank.

      Tank Openings
      Automatic Work Switch
      Total Tank Cleanout
      Auger

      An 8" (203 mm) diameter load/unload auger is standard on all air cart models. A larger 10" (254 mm) diameter auger is optional for models AC280 and AC400. Balanced for a one-man operation, the 8" auger will fill 315 bushels in 7 minutes.

      Bottom / Top Auger Controls - All models feature both top and bottom auger controls as standard equipment. Spring-loaded controls automatically return to neutral position when not engaged and provides the operator with full Forward / Neutral / Reverse functions.

      Auger Lock - Augers feature an adjustable locking mechanism. This secures the auger to the air cart for transport. The additional safety strap is provided to secure the auger should the transport lock accidentally unlatch.

      Auger Swing Lock - This lock prevents the auger from moving once it is placed into 1 of 3 positions. This feature is helpful when filling on sidehills or on days that are exceptionally windy.

      Bottom/Top Auger Controls
      Auger Lock
      Auger Swing Lock
      Options

      Safety / Work Lights - Work lights are available for all air carts and provide additional illumination while seeding at night.

      Quad Axle - Designed primarily for controlled traffic farming this 3m Quad Axle is available for all air carts. This Bolster style axle is designed to oscillate 10 degrees up and down.

      Rear Tow Hitch - All models can be equipped with an optional rear tow hitch. This clevis style hitch is designed for towing liquid fertilizer wagons or NH3 tanks.

      Engine Drive Fan - Available on models AC215 and AC315, the engine drive fan allows for air seeding with tractors that have limited hydraulic capacity. The gasoline powered 27 hp Kohler engine provides sufficient air volume and pressure to double shoot up to 40' (12.2 m).

      Safety/Work Lights
      Rear Tow Hitch
      Engine Drive Fan