High Speed Disc - Fury


The Fury is a high speed compact disc that excels at managing difficult residue in challenging field conditions. Designed for high speed operation, the Fury is more productive than traditional tillage since it operates at field speeds of 8 - 12 mph (12 - 20 km/hr). Two rows of blades set at a compound angle achieve a full cut at 2.5" (63 mm) working depth. This means no uneven ground surface left to hinder planting operations. 4 blade size options: 20" to 26" (508-660 mm) and the choice of 3 rear finishing attachments: steel cage roller; corrugated rubber roller or a spring roller makes the Fury fully customizable for your local residue, field and moisture conditions.

10” BLADE SPACING HS.250 HS.300 HS.350 HS.400
Transport width 11' 10" 11' 10" 11' 10" 11' 10"
Transport height 13' 5" 13' 5" 13' 5" 13' 5"
Weight per ft. average 1031 lb 947 lb 895 lb 854 lb
Horsepower required 335-425 hp 335-425 hp 390-480 hp 450-550 hp
Working depth 2.5" - 5"
Blade spacing 10" with rear blades positioned between front blades so the result is 5" spacing which provides a full cut at 2.5" working depth.
Blade sizes: 20" x 6.5 mm; 22" x 6.5 mm; 24" x 8 mm; 26" x 8 mm, notched or plain, shallow concave to minimize compaction.
Bearings/hubs: Peer TillXtreme bearings; 20" blades use the Hub 30, w/ 4-bolt hubs and the 22", 24" and 26" blades use Hub 40, w/ 6-bolt hubs. Bearings are double roller design, sealed, maintenance-free
Rock protection: Each blade is protected by 4 rubber torsion elements which absorb impact and allow the arm to move up/down independently.

Features


Frame: designed to flex and float

The entire frame is designed to float front-to-back and wings up/down so the machine will follow ground contours and maintain consistent cutting depth in rolling or uneven terrain.

Large Tires

Large radial tires provide an extremely wide footprint for maximum flotation in wet ground and minimize compaction in dry field conditions.

Transport

Excellent transport dimensions - under 12’ wide (11’ 10”); 13’ 5” high.

Manage residue at higher speed

Tears up residue at 8 – 12 mph. Ensures even distribution of residue to eliminate challenges such as uneven or delayed emergence, hair pinning, erosion or planter/ hoe-drill plugging.

Rubber Suspension

Disc arms are supported by 4 (torsion) pre-loaded rubber spring elements that allow each arm to behave independently of all others. Each blade can move up/ down to react to changing ground conditions: ruts/ rocks while automatically springing the arm and blade back to its operating position.

Blades

Rear blades are positioned between front blades. Adjustable rear mounting bar allows fine-tuning spacing for blade size and wear. "Full Cut" is achieved at 2" working depth.

Options


Blade Sizes

20" x 6.5 mm notched front, smooth rear - standard. Optional: 22" x 6.5 mm; 24" x 8 mm; 26" x 8 mm notched or smooth.

Rear Finishing Attachments

Cage roller - standard; Corrugated Rubber roller or Spring roller, optional .